Abrasion Resistant Alimina Ceramic Cyclone Cone for Mine

• Customization: Available
• Application: Refractory, Hydrocyclone Equipment Spare Parts
• Grain Size: 1-10um
• Model NO.: FX100 FX150 FX200 FX250 FX300 FX350 FX660
• Purity: 95%
• Type: Alumina Ceramic Cone
• Material: Alumina Ceramic
• Hardness: Mohs 9
• Content: 92%/95%
• Compressive Strength: 2617
• Volume Density: 3.65g/Cm³
• Hra: 87.5
• Transport Package: Wooden Box
• Specification: customizable
• Trademark: QIJING/yunfeng
• Origin: Shandong
• HS Code: 8421199090
• Production Capacity: 5000000

Product Description

Hydrocyclone is a device for separating and removing heavy coarse particles, mud and sand from sewage. Sometimes it is also used for mud dehydration. When hydrocyclone is used as classification equipment, it is mainly used to form grinding and classification system with mill; When used as desliming equipment, it can be used for desliming in gravity concentration plant; When used as concentration and dehydration equipment, it can be used to concentrate ore dressing tailings and send them to fill underground mining tunnels. 
 
Hydrocyclone has no moving parts and simple structure; The production capacity per unit volume is large and the area is small;High classification efficiency (up to 80% ~ 90%) and fine classification granularity; Low cost and less material consumption.

Technical Specifications:
 

Specification	Data
Material Composition	Stainless Steel and Polyurethane or ceramic
Size Options	Available in FX50 FX100 FX150 FX200 FX250 FX300 FX350 FX400 FX500 FX660 FX710
Pressure Tolerance	Operating Range: 20-100 psi
Temperature Range	Suitable for operation between 0°C to 80°C

Benefits:

• Enhanced Efficiency: Boost operational efficiency by refining particle separation processes.
• Cost-Effectiveness: Optimize resource utilization and reduce operational expenses.
• Improved Performance: Increase throughput and enhance product quality across diverse applications.
• Environmental Sustainability: Encourage sustainable practices through efficient particle separation.

Applications:

1. Mining Industry: Vital for ore classification, dewatering, and tailings management.
2. Mineral Processing: Facilitates efficient mineral separation and concentration processes.
3. Water Treatment: Essential for removing contaminants and solids from water streams.
4. Industrial Operations: Suitable for a wide range of industrial processes demanding effective particle separation.

PACKING




Transport and installation precautions:

Matters needing attention for transportation and installation of ceramic pipe
1. The ceramic composite pipe has high hardness and good toughness, but it should be put gently in the process of transportation and installation to avoid serious collision, especially to avoid direct contact with metal instruments or impact on the ceramic layer on the end surface.

2. The yunfeng bending pipe is installed with directivity. When the bending pipe is installed, the direction indicated by the arrow on the surface of the bending pipe should be consistent with the flow direction of the conveying medium.

3. When installing the pipe, the pipe should be aligned with the center line and level should be adjusted to make sure that both ends meet accurately.The displacement of both ends should be controlled within 1.0mm.

4. When the flexible pipe joint is used to connect and install the pipe, the inserted lengths of both ends of the flexible pipe joint shall be adjusted symmetrically.Since the thermal expansion coefficient of the composite pipe is about 1/3 of that of steel, the expansion clearance can be reduced by 3-5mm.

5. When using flange connection, the flange end shall be flush with the end of the composite pipe.

6. Due to the excellent welding performance of the composite pipe, the pipe connection can be conducted by welding. However, when welding, 45o-60o "V" type slope Angle is 2-4mm and gap is 0.8-1.2mm.




FAQ:
Q: Are you trading company or manufacturer ?
A: We are factory.

Q: How long is your delivery time?
A: Generally it is 15 days if the mould sizes are in stock. or it is 25 days if the mould sizes are not in stock, it is according to quantity.

Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the stock sample for free charge but do not pay the cost of freight.

Q: What is your terms of payment ?
A: For new customers, 100% T/T in advance. For  regular customers, 30% T/T in advance ,balance after received the B/L copy