Qijing Trading Co., Ltd. main business: industrial ceramics, refractory materials, corundum wear-resistant ceramics, papermaking equipment and accessories, pulping equipment and accessories, papermaking dewatering equipment and accessories, pulping equipment and accessories, papermaking dewatering equipment and accessories, slag removal Equipment and accessories, wear-resistant pipes, mining equipment and accessories, alumina ceramic parts, thermocouple protection tubes, special-shaped fittings, pipe liner patch, pipe liner pipe, wear-resistant refractory ceramic parts, elbows, tees , Production and sales of electronic insulation materials.
Customer first, quality first! Your satisfaction is our unremitting pursuit! As long as you request, we will complete the rest. Qi Jing Trading goes hand in hand with you to create brilliant!
Qijing alumina ceramic lined composite steel pipe not only has steel pipe characters of high-strength,good toughness, impact resistance, good weld-ability, but also has corundum ceramics characters of high hardness, high wear resistance, corrosion resistance, heat resistance. which overcome disadvantages of steel low hardness, poor wear resistance and ceramics poor toughness, therefore, ceramic lined pipes have comprehensive property of excellent wear resistance , hear resistance , corrosion resistance ,mechanical shock and thermal shock etc , it is the ideal pipeline of conveying sand , stone , coal , ash, molten aluminum etc particles and corrosive medium,Chemshun Ceramics offers sophisticated design and engineering capabilities of both standard and custom wear linings, installation and project management, as well as abrasion audits of used wear linings..
Product advantage
· Long lifetime and maintenance free operation
· No operation interruption or production losses
· No contamination of the conveyed materials due to abrasion, mixture or oxidation
· Physiologically harmless, suitable for food products
· Smooth surface to achieve good flowability and to avoid plugs
· No spilled material to clean up
Application
| Industry |
Equipment system |
Equipment parts |
| Cement |
Pre-blending system for crashing limestone and crude fuel |
Chute, bunker, pulley lagging, discharge cone |
| Raw mill system |
Feed chute, retaining ring, scraper plate, seal ring, pipeline, bucket guard, cyclone, powder concentrator body, bunker |
| Cement mill system |
Chute, bunker, fan vane wheel, fan casing, cyclone, circular duct, conveyer |
| Ball mill system |
Pulverizer exhauster's body and vane wheel, powder concentrator's body, pulverized coal's pipeline, hot air duct |
| Sintering system |
Inlet/outlet bend, wind value plate, cyclone, chute, dust collector's pipe |
| Afterheat system |
Separator's pipeline and wall |
| Steel |
Raw material feeding system |
Hopper, silo |
| Batching system |
Mixing bunker, mixing barrel, mixing disk, disk pelletizer |
| Sintered material transport system |
Hopper, silo |
| Dedusting and Ash discharge system |
Dedusting pipeline, bend, y-piece |
| Coking system |
Coke hopper |
| Medium-speed mill |
Cone, separation buffles, outlet pipe, pulverized coal's pipeline, burner cone |
| Ball mill |
Classifier, cyclone separator, bend, powder concentrator's inner shell |
| Thermal power |
Coal handling system |
Bucket wheel machine, coal hopper, coal feeder, orifice |
| Ball mill system |
Separator's pipe, elbow and cone, coal mill's elbow and straight tube |
| Medium-speed mill |
coal mill body, separation buffles, cone, pipeline, elbow |
| Fall mill |
Pulverized coal's pipeline and elbow |
| Dedusting system |
Dedusting's pipeline and elbow |
| Ash discharge system |
Fan duster's shell, pipeline |
| Port |
Transporting material system |
Bucket wheel machine's disk and hopper, transfer point's hopper, unloader's hopper, |
| Smelting |
Transporting material system |
Measuring hopper, coke hopper, vibrating screen's chute, head valve, Intermediate bin, tail bin |
| Batching system |
batch hopper, mixing machine |
| Burning system |
Ash bucket, pump calcine tube, hopper |
| Dedusting system |
Dedusting's pipeline and elbow |
| Chemical |
Transporting material system |
Hopper, silo |
| Dedusting system |
Dedusting's pipeline and elbow |
| Processing equipment |
Vibromill liner |
| Coal |
Coal handling system |
Bucket wheel machine, coal hopper, coal feeder |
| Coal washing system |
Hydrocyclone |
| Mining |
Transporting material system |
Hopper, silo |
Dimension
| Type |
ID (mm) |
OD (mm) |
Length (mm) |
Remark |
| Ceramic Tube |
45 |
60 |
50 |
The Bend of Same ID and OD could be provided if provide the radius and bend degree |
| Ceramic Tube |
51.5 |
64 |
50 |
The Bend of Same ID and OD could be provided if provide the radius and bend degree |
| Ceramic Tube |
62 |
77 |
50 |
The Bend of Same ID and OD could be provided if provide the radius and bend degree |
| Ceramic Tube |
65 |
85 |
92 |
The Bend of Same ID and OD could be provided if provide the radius and bend degree |
| Ceramic Tube |
79.5 |
96 |
50 |
The Bend of Same ID and OD could be provided if provide the radius and bend degree |
| Ceramic Tube |
80 |
100 |
300 |
The Bend of Same ID and OD could be provided if provide the radius and bend degree |
| Ceramic Tube |
97 |
117 |
300 |
The Bend of Same ID and OD could be provided if provide the radius and bend degree |
| Ceramic Tube |
100 |
120 |
300 |
The Bend of Same ID and OD could be provided if provide the radius and bend degree |
| Ceramic Tube |
102 |
120 |
300 |
The Bend of Same ID and OD could be provided if provide the radius and bend degree |
| Ceramic Tube |
125 |
145 |
300 |
The Bend of Same ID and OD could be provided if provide the radius and bend degree |
| Ceramic Tube |
135 |
155 |
300 |
The Bend of Same ID and OD could be provided if provide the radius and bend degree |
| Ceramic Tube |
150 |
170 |
300 |
The Bend of Same ID and OD could be provided if provide the radius and bend degree |
| Ceramic Tube |
150 |
175 |
300 |
The Bend of Same ID and OD could be provided if provide the radius and bend degree |
| Ceramic Tube |
150 |
180 |
300 |
The Bend of Same ID and OD could be provided if provide the radius and bend degree |
Other size can be customized
Technical Data Sheet
| NO. |
Propertities |
Unit |
92% AL2O3 Series |
95% AL2O3 Series |
| 1 |
Al2O3 |
% |
92.00 |
95.00 |
| 2 |
Water Asorption |
% |
0.00 |
0.00 |
| 3 |
Density |
g/cm3 |
≥3.60 |
≥33.65 |
| 4 |
Flexural Strength |
Mpa |
270.00 |
320 |
| 5 |
Moh's Hardness |
Grade |
9 |
9 |
| 6 |
Rockwell Hardness |
HRA |
80.00 |
87 |
| 7 |
Vickers Hardness (HV10) |
Kg/mm2 |
1000 |
1200 |
| 8 |
Fracture Toughness |
Mpa.M1/2 |
3-4 |
3-4 |
| 9 |
Thermal Expansion Coefficient (25-1000ºC) |
1x10-6/ºC |
8.00 |
8.1 |
| 10 |
Max. Operation Temperature |
ºC |
1450 |
1500 |
Transport and installation precautions:
Matters needing attention for transportation and installation of ceramic pipe
1. The ceramic composite pipe has high hardness and good toughness, but it should be put gently in the process of transportation and installation to avoid serious collision, especially to avoid direct contact with metal instruments or impact on the ceramic layer on the end surface.
2. The yunfeng bending pipe is installed with directivity. When the bending pipe is installed, the direction indicated by the arrow on the surface of the bending pipe should be consistent with the flow direction of the conveying medium.
3. When installing the pipe, the pipe should be aligned with the center line and level should be adjusted to make sure that both ends meet accurately.The displacement of both ends should be controlled within 1.0mm.
4. When the flexible pipe joint is used to connect and install the pipe, the inserted lengths of both ends of the flexible pipe joint shall be adjusted symmetrically.Since the thermal expansion coefficient of the composite pipe is about 1/3 of that of steel, the expansion clearance can be reduced by 3-5mm.
5. When using flange connection, the flange end shall be flush with the end of the composite pipe.
6. Due to the excellent welding performance of the composite pipe, the pipe connection can be conducted by welding. However, when welding, 45o-60o "V" type slope Angle is 2-4mm and gap is 0.8-1.2mm.
Packaging
FAQ:
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 15 days if the mould sizes are in stock. or it is 25 days if the mould sizes are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the stock sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: For new customers, 100% T/T in advance. For regular customers, 30% T/T in advance ,balance after received the B/L copy
Audited Supplier 
){kind=link}
){kind=link}