Hot Selling Alumina Ceramic Tile Wear Resistant Ceramic Plate

• Application: Refractory, Structure Ceramic, Industrial Ceramic, ISO9001
• Material: Alumina Ceramic
• Type: Ceramic Tubes
• Transport Package: Pieces
• Specification: Customizes
• Trademark: Qijing
• Model NO.: 150 * 50 * 12mm
• Origin: China
• HS Code: 6909120000
• Production Capacity: 50000

Product Description

Basic Info.

Name	Long(L)mm	Outside diameter(R)mm	Internal diameter(r)mm	Notes
Alumina Ceramic Tube	≤500	30-450	30-450	Tolerance of each dimension±1%

 

Specifications

Name:		99% Alumina Ceramic Tube
Size:		As your request
Content of Al2O3:		≥ 99%
Density:		3.9g/cm3 - 3.95g/cm3
Max. Length		2000mm
Usage temperature:		≤1800ºC
Color		Ivory
Chemical component
Al2O3	R2O		Fe2O3		SiO2
≥99%	≤0.2%		≤0.1%		≤0.2%
Technical parameters
Volume density:				≥3.80 g/cm3
Apparent porosity:				<1%
Bending resistance:				>350 Mpa
Compressive strength:				>12000 Mpa
Dielectric conatant ε (1MHz):				2
Maximum usage temperature:				1800C
Usage 1) Thermocouple protections; 2) Heat treatment furnace and toughened furnace; 3) Inner liner tube and heating tube in electric furnace;   4) Some are used in furnaces.

Points to note for transport and installation
Matters needing attention for transportation and installation of ceramic pipe
1. The ceramic composite pipe has high hardness and good toughness, but it should be put gently in the process of transportation and installation to avoid serious collision, especially to avoid direct contact with metal instruments or impact on the ceramic layer on the end surface.
2. The qijing bending pipe is installed with directivity. When the bending pipe is installed, the direction indicated by the arrow on the surface of the bending pipe should be consistent with the flow direction of the conveying medium.
3. When installing the pipe, the pipe should be aligned with the center line and level should be adjusted to make sure that both ends meet accurately.The displacement of both ends should be controlled within 1.0mm.
4. When the flexible pipe joint is used to connect and install the pipe, the inserted lengths of both ends of the flexible pipe joint shall be adjusted symmetrically.Since the thermal expansion coefficient of the composite pipe is about 1/3 of that of steel, the expansion clearance can be reduced by 3-5mm.
5. When using flange connection, the flange end shall be flush with the end of the composite pipe.
6. Due to the excellent welding performance of the composite pipe, the pipe connection can be conducted by welding. However, when welding, 45o-60o "V" type slope Angle is 2-4mm and gap is 0.8-1.2mm.



FAQ
01.How to buy your  products?
  A: You can provide us yourtechnical parameters.(connect us for more details).

02. How to pay?
  A: TT and L/C are acceptable and TT will be more appreciated. 30% deposit before producing, 70% balance before loading by TT.

03. What is the delivery time?
  A: It depends on order quantities. Generally speaking, the delivery time will be within 4 to 6 weeks.

04. How to install after the equipment arriving destination?
  A: We will provide detailed illustrations to you. If it is necessary, we will send technicians to help you. However, the visa fee, air tickets, accommodation, wages will be paid by buyers. 

Contact
Twiter:@Daianna28364490
Facebook: Aana