Customized Industrial Wear Resistance Alumina Ceramic Cone and Cylinder

• Customization: Available
• Application: Refractory, Structure Ceramic, Industrial Ceramic
• Type: Ceramic Tubes
• Model NO.: ID25-600
• Temperature Classification: High Temperature Piping
• MPa Classfication: Ultra High Pressure Piping
• Diameter: >720mm
• Medium: Liquid
• Cross-Section Shape: Semi-Circular
• Connection Type: Flange
• Standard: ISO9001
• Material: Alumina Ceramic
• Transport Package: Wooden Box
• Specification: 30-450
• Trademark: QIJING
• Origin: Shandong
• HS Code: 6914100000
• Production Capacity: 50000 Pieces a Year

Product Description

   Qijing industrial ceramics are widely used in power, coal, metallurgy, chemical industry and other industries. As an abrasive material and corrosive medium.
Qijing Industrial Ceramics is an ideal wear-resistant and corrosion-resistant pipeline, used to transport sand, coal, ash and aluminum liquid, and is suitable for different high-temperature pipeline inner diameters.

In addition to the ash removal, slag discharge pipe, powder feeding and powder returning pipes of coal-fired power plants, ceramic-lined wear-resistant steel pipes are also widely used in the following industries:
1. Mine:
1. 1Coal water slurry, coal washing slime, mine filler, pulverized coal in the coal industry
1. 2Metal mines: pipeline transportation of concentrates and tailings.
2.1 Metallurgy:
2. 2The blast furnace coal injection and slag conveying pipelines in iron and steel plants
2.3 Optimal pipelines for steel-making conveying ferroalloys and refining outside the furnace.
3. Cement plant.
 
Photo show








 

Ceramic pipe advantages:

1. High hardness
2. Superior abrasion  
3. Corrosion and chemical resistance
4. Light weight
5. Low maintenance cost: Super wear-resistance reduce the maintenance frequency and also the maintenance cost.
6. Good fluidity : Smooth surface ensure the free flow of material without  blocking

 

pipe sizes :

Product	ID(mm)	OD(mm)	Thickness(mm)	Length(mm)	R(mm)	Degree
Straight Tube	76	106	15	150-250	/	/
Straight Tube	100	140	20	305	/	/
Straight Tube	150	185	17.5	150-250	/	/
Straight Tube	152	182	15	150-250	/	/
Straight Tube	200	240	20	305	/	/
Bend	76	106	15	/	400	7.5
Bend	101	131	15	/	500	5
Bend	150	185	17.5	/	1500	3
Bend	151	181	15	/	750	7.5
Qijing Ceramic pipe sizes range : 10~500 mm

 

 
 
Specifications

alumina content	92	95	97	99
Al2O3(%)	≥92	≥95	≥97	≥99
Fe2O3(%)	≤0.2	≤0.15	≤0.15	≤0.1
Hardness	≥8	≥9	≥9	≥9
Porosity(%)	≤0.02	≤0.02	≤0.02	≤0.01
Density(g/cm3)	≥3.60	≥3.65	≥3.75	≥3.9
Length(mm)	≤500	≤500	≤500	≤500
MAX  ID(mm)	≤620	≤620	≤620	≤620
Usage 1) Thermocouple protections; 2) Heat treatment furnace and toughened furnace; 3) Inner liner tube and heating tube in electric furnace;   4) Some are used in furnaces.

Transport and installation precautions:

Matters needing attention for transportation and installation of ceramic pipe
1. The ceramic composite pipe has high hardness and good toughness, but it should be put gently in the process of transportation and installation to avoid serious collision, especially to avoid direct contact with metal instruments or impact on the ceramic layer on the end surface.

2. The qijing  bending pipe is installed with directivity. When the bending pipe is installed, the direction indicated by the arrow on the surface of the bending pipe should be consistent with the flow direction of the conveying medium.

3. When installing the pipe, the pipe should be aligned with the center line and level should be adjusted to make sure that both ends meet accurately.The displacement of both ends should be controlled within 1.0mm.

4. When the flexible pipe joint is used to connect and install the pipe, the inserted lengths of both ends of the flexible pipe joint shall be adjusted symmetrically.Since the thermal expansion coefficient of the composite pipe is about 1/3 of that of steel, the expansion clearance can be reduced by 3-5mm.

5. When using flange connection, the flange end shall be flush with the end of the composite pipe.

6. Due to the excellent welding performance of the composite pipe, the pipe connection can be conducted by welding. However, when welding, 45o-60o "V" type slope Angle is 2-4mm and gap is 0.8-1.2mm.


Packaging

	Packaging
	Size	Order
	Weight	500KG-
	Packaging Details	The normal package is wooden box(Size: L*W*H). If export to european countries,the wooden box will be fumigated.If container is too tigher,we will use pe film for packing or pack it according to customers special request.

 

	Packaging
	Size	Order
	Weight	1.2 T-
	Packaging Details	The normal package is wooden box(Size: L*W*H). If export to european countries,the wooden box will be fumigated.If container is too tigher,we will use pe film for packing or pack it according to customers special request.

FAQ:
Q: Are you trading company or manufacturer ?
A: We are factory.

Q: How long is your delivery time?
A: Generally it is 15 days if the mould sizes are in stock. or it is 25 days if the mould sizes are not in stock, it is according to quantity.

Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the stock sample for free charge but do not pay the cost of freight.

Q: What is your terms of payment ?
A: For new customers, 50% T/T in advance. For  regular customers, 30% T/T in advance ,balance after received the B/L copy